Kamco CF210 Titan Power Flusher 230v

CF210 is for industrial / commercial work, for domestic work , please see CF40 and CF90

COMMERCIAL POWER FLUSHING & DESCALING PUMP

The CF210 Titan is a purpose built tool for power flushing heating and cooling systems to cure the circulation and noise problems which often occur with time, or as a result of design or installation faults. These problems are generally caused by accumulations of sludge, corrosion deposits and scale which need to be removed.

The CLEARFLOW pump is temporarily connected into a system so that the high water velocity, combined with an instantaneous flow reversing device, dislodges and mobilises sludge and corrosion deposits, even those which resist traditional cleaning methods.

Having loosened and mobilised the debris, the CLEARFLOW pump forcibly expels it from the system through a full bore dump valve and out to waste using a high velocity flow of fresh water.

Radiators and other heat emitters may be individually flushed without removal or disconnection from the system. After the flush, the system is full of clean water and reinstatement to normal operation takes only a few minutes.

The CLEARFLOW CF210 is built with acid resistant materials and can handle all normal commercially available descaling and power flushing chemicals. It is suitable for power flushing commercial and industrial systems, and for descaling commercial boilers, calorifiers, chillers and water heaters. It may also be used to circulate chlorine solutions for system sterilisation purposes.

The CF210 Titan is a purpose built tool for power flushing heating and cooling systems to cure the circulation and noise problems which often occur with time, or as a result of design or installation faults.

The Clearflow CF210 can handle all normal descaling and power flushing chemicals. It is suitable for power flushing commercial and industrial systems, and for descaling commercial boilers, calorifiers, chillers and water heaters.

• Chemicals safely contained in integral 125lt tank
• Handles all descaling and flushing chemicals
• Instantaneous flow reversal
• Self priming
• Run-dry capability
• Integral waste water discharge facility
• Integral fresh water flush activity

Technical Data

• Electric motor: 3/4 HP, IP55 rating, 230 or 110 volt 50Hz; 120volt, 60Hz.
• Tank capacity: 125 litres (27 gallons)
• Max.flow rate: 150+ l/min
• Max. Head: 28 mt
• Flow and return hoses: 2 x 5 mt hoses, 22 mm I.D. reinforced PVC + 2 x 0.5 mt circulator pump adaptor hoses
• Hose end fittings: 1” BSP x 22 mm brass hose couplings
• Dump hose: 8 metre long, 1” BSP brass hose adapter
• Overflow hose: 3 metre long, 1” BSP hose adapter
• Water inlet hose: 8 metre long, 3/4” brass hose connector
• Chemical handling ability: All commercially available acids, alkaline solutions, chlorine solutions
• Weight: 28.5 kg (exclusive of hose set), 40.5 kg with full hose set
• Dimensions (mm) w x l x h: 530 x 680 x 890

Your purchase of the Kamco Clearflow CF210 – Titan Power Flusher includes:

• CF210 Titan Power Flusher
• Chemical Starter Pack - enough for 2+ jobs
• pH test strips
• Full set of hoses
• Instruction Manual
• FREE TRAINING

Technical Specifications

Manufacturer Part Number

CDP210F

Documents

• Kamco CF210 Titan Power Flusher 230v - (409.22 KB)
• Kamco CF210 Titan Power Flusher 230v - (5.89 MB)