This twin impeller bathroom pump will efficiently boost the hot and cold water supplies to showers, baths, basins and toilets in a positive or negative head, gravity fed installation.
The CT60 Bathroom Universal pump from Salamander Pumps has been specifically designed to deliver the pressure and performance needed to boost water supplies to bathrooms, en-suites and utility rooms.
Suitable across a wide range of shower types and heads, single and mixer taps, and will refill your toilet cistern in double quick time.
The CT60 Bathroom Universal pump is a 1.8 bar twin regenerative shower and bathroom pump suitable for boosting water performance in a gravity fed, negative head or positive head system.
This pump can be used with conventional and multi-function showers and a shower head up to 100mm. With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting bathroom performance. AV couplers with isolating valves are included.
Guarantee |
3 years |
WRAS Approval |
1507004 |
Pump Type |
Regenerative |
Mecahnical Seal |
Nitrile/Carbon/Ceramic |
Anti-vibration feet |
Yes |
Inlet isolators |
Yes |
Flexible Hoses |
4 |
Pressure @ closed head |
1.8 bar |
Pressure @ 8lpm |
1.7 bar |
Pressure @ 16lpm |
1.3 bar |
Maximum water Temperature |
65°C |
Pump connections |
3/4" BSP |
Hose connections (UK model) |
3/4" female x 15 mm push-fit isolating valves |
Hose connections (ROI model) |
3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses |
Motor type |
A.C Induction |
Motor duty rating |
Continuously rated |
Power supply |
230V |
Current (full load) |
1.95 amps |
Power consumption |
455 watts |
Fuse rating |
3 Amps |
Power cable (pre-wired) |
1.5 metres |
Enclosure protection (IP rating) |
IPX2 |
Length |
185mm |
Width |
125mm |
Height (Excluding hoses) |
315mm |
Weight (Excluding hoses) |
4.58 kg |
Manufacturer Part Number | CT60BU |