For maintained pressure at higher flow rates, you need one of our Right Pump 3.0 bar shower and whole house pumps. The centrifugal impeller means these pumps offer an extra boost to your appliances and are quiet with it.
This premium twin ended pump will quietly and efficiently boost the hot and cold water supplies to showers, baths, basins, toilets and whole house appliances in a positive head gravity fed installation.
This product was formerly known as RHP100 or RSP100.
The RP100PT pump is a 3.0 bar twin centrifugal shower pump suitable for boosting water performance in a gravity fed, positive head system.
With Crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or whole house appliances. This pump is suitable for use across a wide range of shower types and heads up to 200mm as well, including Victorian, multi-function and showers with massage function or champagne spray. AV couplers with isolating valves are included.
Guarantee |
3 years |
WRAS Approval |
1810090 |
Pump Type |
Centrifugal |
Noise |
55.5dBA* |
Mechanical Seal |
Nitrile/Carbon/Ceramic |
Anti-vibration feet |
Yes |
Inlet isolators |
Yes |
Flexible Hoses |
4 |
Pressure @ closed head |
3.0 bar |
Pressure @ 8lpm |
2.85 bar |
Pressure @ 16lpm |
2.65 bar |
Maximum water Temperature |
65°C |
Pump connections |
3/4" BSP |
Hose connections (UK model) |
3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses |
Hose connections (ROI model) |
3/4" female x 21mm push-fit x 280 mm long, isolating valves on all hoses |
Motor type |
A.C Induction |
Motor duty rating |
Continuously rated |
Power supply |
230V |
Current (full load) |
4.60 amps |
Power consumption |
1045 watts |
Fuse rating |
5 Amps |
Power cable (pre-wired) |
1.5 metres |
Enclosure protection (IP rating) |
IPX2 |
Length |
415 mm |
Width |
148 mm |
Height (Excluding hoses) |
161 mm |
Weight (Excluding hoses) |
9.06 kg |
Manufacturer Part Number | RP100PT |